Fasteners for plaster guides Nova (100 pcs in a pack)

Fasteners for plaster profiles NoVa (100 PCS in package)

Fasteners for plaster guide profiles NoVa are designed for installing plaster profiles on floors and walls during leveling plastering work. The fastener consists of two parts — a base and a clamp. Manufactured from high-quality environmentally safe polypropylene. Installation of any type of profiles (T-shaped, A-shaped) is possible onto the fastener.

The fastener base for profiles is installed onto the head of a self-tapping screw (black drywall screw). With proper setup, a minimum plaster layer of 12 mm is achieved, including the 6 mm plaster profile guide. Utilizing the fasteners for plaster profiles will help you correctly install the plaster guide profile on your own, while significantly saving plaster mix consumption, increasing operational efficiency and reducing time expenditures when conducting plastering and finishing works; it will help to create an ideally flat floor screed on your own without self-leveling compounds.

Instruction:

1. Drill and set 5-6 self-tapping screws according to the level at an identical distance from each other.

2. Put the fastener bases onto the heads of the self-tapping screws and insert the plaster profile into them so that the profile base rests against the border side of the fastener base.

3. Lock the plaster profile inside the fastener base by pressing down the profile with a plug clip, inserting it into the technological slots on the fastener base.

4. You can proceed to plastering work immediately after installing the plaster guide profiles.

Characteristics:

• Material: plastic

• Quantity per package: fasteners and plugs, 100 pcs of each per pack;

• Manufacturer: Ukraine

Specifications